Sunday, 27 November 2016

Week 9 - Hair for TV and Film

In class this week we practiced curling the hair for TV and film. Continuity is key on screen, therefore curling the hair is the best way of achieving this.  The curls can be styled in a variety of different ways. Using a paddle brush you can keep the curls very natural or you can run your hands through the hair and make it more volumed.

Products used:
-       -   Curlers
-       -   Pin tail comb
-       -   Paddle brush
-       -   Pins

Process
- Brush through the hair to remove any knots
- Section the hair into either a middle parting or a side parting. This depends on the overall look you want to achieve
- Placing the curler horizontal to the head, curl the nearest section to the parting first. Make sure that you keep the hair tight and roll the curler down 
- Hold for an average of 10-12 seconds. This is dependent on the thickness of the hair. The top of the hair on the curler should be hot to touch when ready
- Pull barrel out sideways so that the curl does not drop 
- Pin in place and leave until cool. This ensures that the hair will keep its curl
- Take a section of hair that starts from the hairline and works from the bottom of the curl you already made, to the ear. Curl this away from the face keeping the curler vertical to the head
- Take the next piece of hair behind this and complete the same technique. It helps to pull the hair forwards when placing the hair in the curler so that the hair is taut. The curler will then sit flat to the head
- Complete this process again on the other side of the head. You want to be working backwards until you essentially have a straight line from one side of the head to the other 
- Using brick work, you will now curl the rest of the head 
- Start by curling the hair in sections from one side to the other
- Curl the hair under and then pin until cool
- In between the gaps of the curls you have already created you then need to make another line of curls. Using the brick work technique ensures you do not miss any sections and it makes the hair fall nicer
- Carry on completing this process until you reach the bottom of the head
- Ensuring all of the curls are cool, you can remove the pins
- Take the paddle brush and brush the curls out. Brush over the curls and underneath
- Ensure that you are not too delicate when brushing the curls because they will not fall properly
- You can style the curls using the brush
- Apply a shine spray and a finishing spray to finalise the look


Reflection

I found creating these curls fairly easy, however the main area that I struggled with was keeping the hair tight on the curler. It seemed to always become less taut the near the hair is to the scalp. Next time I complete this, I will take more time in ensuring that I keep the hair tight all of the time. I will also make sure that I keep the sections clean. In one particular section at the front of the head, one piece of hair dropped out without me realising. This was due to me pulling this section of hair from too far back, therefore it fell out of the tongs. I found using the brick work process a lot easier and it allowed me to achieve better curls. Curling the hair under is a lot easier than working vertically. Overall, I found these curls to be really effective. I thought that using a paddle brush to brush out the curls would make the curls drop, however it made it easier for me to style the hair. 

Week 7/8 -Timed Assessment

After practicing my design last week, I altered my final look by focusing on using the colour purple. I wanted to make the eyes the feature area of the face, therefore I chose to use glitter across the lid and add a contrast of gold as well. For the lips I decided to use a blue/purple toned colour to match with the shade of the eyes. I wanted the base make-up to be full coverage and contoured. This is going to be the evening make-up look and hair, therefore I wanted the look to be very bold yet still glamorous. 

Products used:
- Cleaner, toner, moisturiser
- A range of make-up brushes
- Illamasqua matte primer
- Kryolan foundation palette 
- Kryolan concealer 
- Illamasqua translucent powder
- Illamasqua sculpting duo (contour and highlight)
- Mac blush -blushbaby
- Anastasia dip brow pomade - chocolate
- Mac cool neutrals palette - beige colour
- Maybelline purple palette
- MUA black eyeliner
- Barry m Glitter pencil - purple
- Eyelure glue
- Purple glitter
- Aqua colour - gold
- Charlotte Tilbury - gold glitter
- Maybelline mascara
- Aqua colour - blue/purple/black
- NYX finishing spray

- Straighteners
- Paddle brush
- Pin tail comb
- Hairspray
- Pins


I came to lesson and set up my station with all the products that I needed. I also had my face and hair chart visible in front of me so that I could reference back to it. I started by moisturising, cleansing and toning the face. This allowed me to start with a fresh and clean face. I primed the face with a matte primer and then matched the foundation to my models skin tone. I covered any blemishes and highlighted the under eyes, chin and forehead. To set this I added a translucent powder. I bronzed and contoured the cheekbones, forehead and under the chin. This will accentuate the features. I added slightly more to the face because it will look better when photographed. For the eyes I added a neutral base across the whole lid. In the crease of the eye I added a purple matte eyeshadow and built this up. To darken this I added a deeper purple. Using the eyeliner I placed this all over the lid and blended it upwards ensuring that there were no harsh lines. I kept adding to this until I felt that it was dark enough. Over this I then added the purple glitter shade and blended again. This added back in the purple tones that I desired. I then added the eyelure glue to the lid and waited for it to become tacky. I applied the glitter to this and built up the colour. I wanted the eye to be even with the amount of glitter and for there to be no obvious gaps. I asked my model to keep her eyes closed until the glue was dry. Under the eye I created a gold line that was elongated and came up past the eye. I then ensured that the eyeshadow was blended to this. To finish the eyes I simply added mascara to the lashes. For the lips I mixed together blue/purple and black to create a lip colour. I applied the colour to the lips and altered this until it was perfect. I added a finishing spray all over the face. 

I wanted the hair to be simple yet effective in creating a glamorous and powerful look. I decided to slick the hair back into a high ponytail. I straighten the hair first and the pulled all over her hair up onto the the crown of her head. I tried to make this as tight and as slicked back as possible. Taking a section of hair from the bottom of the base of the ponytail I wrapped this around where the hairband was positioned. This adds an element into the hair and makes it not just a simple ponytail. Due to the make-up being so intense I did not want the hair to detract from this and over power this. With the hair being pulled back from the face, we can see the make-up and it stands out more. 







Overall, I was so pleased with the final outcome. I was worried that the the make-up was going to be too bold and not work together as an overall look. The eye and lip colour worked together perfectly and did not clash. Making the lip colour more blue toned, allowed this to work.The was also sophisticated and worked with the make-up. I would have liked this to have been slightly tighter on the head, however I will ensure I do this when I shoot my film. The other aspect that I was not as happy with, was the glitter on the eyes. The flash of the camera turned it more blue-toned than it was in real life which was really disappointing. I took photos on my phone though and the purple stood out.When I film I will not being using a flash, therefore this colour will be visible on the camera.

Monday, 21 November 2016

Week 5/6 - Practice of Timed Assessment for Make-up/Hair

In lesson today I practiced one of my designs for a look that would feature in my film. Practicing the look allowed me to see if the design I had created would work overall and on camera, as well as simply being able to see if I liked it. Working from my favourite face chart, I created the design in class. The two things that I wanted to test out were the eye make-up and the lip colour. I was slightly unsure about these aspects, therefore I took advantage of the time that I had to practice. I looked at the eye shadows I had that I could practice with and test out. 

Products used:
- Moisturiser 
- Illamasqua matte primer
- Kryolan foundation palette - FS 38
- Kryolan concealer palette - D3/D4
- Illamasqua transclucent powder
- Illamasqua sculpt duo (contour and highlight)
- Mac blusher - Lazy sunday
- Freedom dip brow pomade - chocolate
- Mac cool neutrals palette
- Mac lipstick - sin
- Kryolan supra palette - blue/purple/black 

I first moisturised the skin and clipped back the hair to ensure that it was off of the face. I then placed a gown over my model so that none of the products could fall on her. I applied the matte primer all over the face. I wanted a more conservative make-up look, therefore I chose this over a satin primer. I matched the foundation to my models skin and applied all over making sure to buff it all over the face, down the neck and the ears. I concealed under the eyes, nose and any blemishes. Using the concealer I highlighted the chin, centre of the forehead and down the nose. To see this I then added the translucent powder. I wanted a defined contour and bronzed face. I applied this to the cheeks, hairline and under the chin to accentuate the features. To add warmth to the face I applied blusher to the cheeks. I shaped the eyebrows using a dip brow pomade. With the eyes I applied a neutral base colour all over the lid. In the crease I added a burgundy shade into the crease and on top of that a dark brown. On the lid I added a shimmery black and blue eyeshadow. In the outer third I added a deeper purple colour to accentuate the eyes. On the lip I applied a deep berry lipstick all over. This was not quite the right shade, therefore I mixed the blue, purple and black to the lip to darken the colour and make the colour less red based. 




Overall I liked the look that I created, however I felt that the lip and eye colour did not go together. I thought that the eyes were too blue and the lips were focused more on a purple colour. I have realised that I want the eye colour to be glittery and purple. The eyes should stand out on camera and I want these to be the feature element of the whole look. To match this I think the lips should be more blue toned with hints of purple. In terms of the base make-up I was really happy with this. Due to this make-up looking being on camera I want it to be extremely full coverage. The contour needs to be strong as well. When I film I will set the make-up with a fixing spray, however I can also top some parts up whilst filming. Before I film, I will test out the look again using a different eye and lip colour to finalise the make-up look. 

Thursday, 20 October 2016

Week 4 - The Beauty of Sci-Fi

In our hair and make-up lesson this week we were looking at the beauty of Sci-Fi in films. We were given characters from Sci-Fi films whose looks we had to copy. These specific looks were not typical make-up designs. They consisted of painted faces using a variety of different colours, techniques and shapes. In class we recreated our chosen character from either Mad Max, Blade Runner or The Hunger Games. To complete the look ourselves we could use either our aqua or supra colour palette. We were told about the properties of both of these palettes and depending on the look we had chosen we had to decide what would be the best one to use. 

Aqua Palette 

  • Water based - you can add water to the colour to change the transparency of it if you wanted a thinner layer on the skin
  • Not as pigmented when first applied
  • You can also then build the colour up in layers to make it as pigmented as possible
  • Using a sponge helps if you want different textures
  • You need to think about your make-up look and the scenario your character will be in if you choose to use aqua colour. If you know your character will be in hot conditions then they may sweat. This will cause the colour to run
Supra Palette
  • Grease based - can be applied straight to the skin
  • Blends easily due to the texture
  • To be used in conditions where actor could be sweating/in water - won't run 
  • When supra colour is dry, you can apply aqua colour over the top 
To finish the look you can apply fixer spray over the top to set everything and it will not rub off on clothes. You can also apply eye shadow or powder over the top to set this. 

I chose to complete a look that was featured in Mad max. It was simple yet featured many different ways of application. Black was the only colour used and 

Week 3 - Hollywood Glamour

In our third lesson on hair and make-up for TV and film, we learnt about creating glamorous waves in the hair.  We would be using heated rollers to create the waves. It is possible for you to use curlers, however the rollers are quicker to use and will hold a stronger curl. 

Products used
- Heated rollers
- Paddle brush
- Pin tail comb
- Clips

Process
Create your side parting on the hair ensuring it is as straight as possible as this will give you neater curls when you take out the rollers and style the hair. We would be using the blue rollers from our heater roller set, however if your model has thinner hair then the white ones will work just as well. Working from the front to the back take a section of hair that is no wider than the roller itself and not too thick. Place the roller at the top of the section of hair and roll downwards ensuring that the hair is flat. You can use the end of your comb to bring the end strays of hair round the roller. Use a clip to ensure it will stay in place. On the side with the largest amount of hair complete this process four times and on the other side twice. The hair you have left just above the ear will be curled towards the face using the same process. Start and the front with an even section and then do this once more. You should then have an even line around the front of the head. Now you have reached the top and back of the head you should use the brick work technique to ensure every section of hair is curled. The sides of the head should then be rolled forwards again. When you have completed curling all of the head leave in for 5/10 minutes. Take the clips out and pull out the rollers. Pulling these out too fast or hard could risk the curls being damaged. When all of the rollers are out you then need to style and place the hair. Using a brush take a large section from the front and brush over the top then underneath and then back over the top again. This will loosen the waves but not risk the curls dropping. Once you have brushed all of the hair you can then begin to style the hair and place it accordingly. 



Reflection
I have only worked with heater rollers once before, however I do find the process fairly easy. The only thing that I find hard is keeping the hair tight to the roller, but making sure all the hair is flat to the roller. If the hair is loose then there will be a bulge at the bottom which will not curl fully. If your model has long and thick hair then I think the process would take a long time. In class I ran out of lesson time to finish curling the whole head, however I tried my best to get as much done as possible and practice all the techniques used. My model had thinner hair along her hairline therefore it was really hard to curl these smaller sections. It took me a few tries to begin with to achieve a tight curl, however it got easier the more I completed. I would love to have been able to complete the all the curls across the head, however I am happy with what I managed to complete. The curls looked professional and slick. I feel that with product in the hair it would have looked even better. 

Monday, 10 October 2016

Week 2 - Make-up for Black and White Film

In this weeks lesson with Lottie we moved onto the make-up of TV and film. In black and white films, actors and actresses features need to be accentuated so that they stand out on camera. This style of make-up really interested me and I was intrigued to learn more about why make-up was applied like it. Through research I found out that this type of era goes back to the stage era. In the 18th century there was no electricity, therefore the stages had to be lit through candle light. This meant that the actors facial expressions and features would be blurred due to the soft light. The darker make-up was applied to the face to stop this from happening. This light also meant that any flaws could be easily picked out. Different types of grease were tested to see what would work best as stage make-up. 

Products used
- Kryolan foundation palette 
- Kryolan concealer palette
- Range of brushes
- Illamasqua translucent powder
- Illamasqua highlight 
- Mac cool neutrals palette - brown
- Black supra colour

Process of creating make-up looks for black and white films
- Always moisturise, cleanse and tone the face
- colour match your foundation to the models/actors skin
- then add a paler colour to this matched shade. The base was always a lot paler than the persons skin
- apply using your brush or fingers
- avoid getting foundation on the lips because the colour that you then apply will not be as dark and pigmented
- don't forget to apply the base colour to the ears and neck
- using a buffing brush make sure all of the foundation is blended into the hairline
- using the palm of your hand push gently on the skin. This will give a natural look and make it look like the actor isn't wearing heavy amounts of make-up
- Using a translucent powder with slight shimmer or even a highlighter place this down the nose, cheeks, chin, cupids bow and the forehead
- using a brown, apply this colour into the crease of the eye and bring it out slightly. 
- blend this out and then apply more if it needs to be darker
- across the lid apply a paler skin tone colour. Add water to the eyeshadow to bring out the pigment and it will dry matte
- harsh lines will show up on camera which is what is desired. Avoid pinks and oranges
- Layer black/brown to accentuate the eyebrow
- Contour the cheeks, nose and chin using a brown
- Blend out the colour by using circular motions with either a brush or your finger, however you need to leave the line looking strong and the colour still pigmented
- Create a smudge lip
- UIing either a black paint or liner place all over lips and slightly over your models natural lip line
- Make sure that no natural lip colour is visible as it will look patchy on the camera
- When complete take a photo and change add a black and white filter to see if you need to add more definition or tone it down



Reflection
I was unaware of this make-up style and the effect it gave before this lesson. I find the effect it gives is extremely clever and works well on camera. I found being able to see the colour image and one in black and white really helpful because I could then see what I needed to add or improve. Overall I really enjoyed creating this make-up look due to it being something quite unusual. I found it hard trying to stop myself from blending away the harsh lines and making it look more like how people wear make-up nowadays. Overall I was really happy with my first attempt at this style of makeup and going against the norms. I find it so helpful learning techniques and skills like this because it is all useful knowledge to know when working in the industry. 


Reference
https://silentology.wordpress.com/2016/02/22/silent-film-makeup-what-was-it-really-like/

Week 1 - Beards, Mustaches and Wigs

In our first lesson back with Lottie she informed us all about fake beards and mustaches as well as how to apply wigs to the head. Wigs that are used in films and TV shows are normally high in price due to the hair being human hair. 

Products used
- Scissors 
- Coloured synthetic and real hair
- Stopple paste
- Powder brush
- Spirit gum remover

Fake beards and Mustaches
When creating a fake beard or mustache on your actor you first need to find the colour of hair that best suits them. If they are going to be wearing a wig then you need to match it to this. It can look more realistic if you add in lighter and darker pieces of hair as a persons facial hair is never normally all one colour. When you have collected all of strands of hair, you then need to cut or pull these into the smallest of parts. They should be as small as possible, so that you can apply them easily to the face and build it up. Place a line of stopple paste on the skin where you want the facial hair to be. Using a big make-up brush pick up some of the hair onto the brush and dab onto the skin. The hair will stick to the paste. You can then build up the hair as much as possible. To remove use spirit gum remover. 

Some beards and mustaches are pre-made and the hair is stitched into fabric that can then be placed on the skin. These are used if you want fuller looking facial hair but the process to make them takes longer.



Wigs
Any wig no matter the colour or length can be applied to anyone. A bald cap can be applied to the hair to hide the models original hair. Using spirit gum on the head and the wig itself, you then stick the wig to the head. The hair of the wig is sewn into fabric, therefore the spirit gum does not go onto the hair. Again you then use spirit gum remover to take off the wig.


Reflection
This was the first time that I had worked with wigs and fake facial hair. I was slightly apprehensive because I know that it can be hard to make it look realistic. I loved working with the wigs because it allowed me to see how different hairstyles and colour can change someones face shape and the colour of the skin. It is therefore important when designing your characters that you think about things like this. The fake beard would have looked a lot more realistic if we had more time to blend it to the skin even more, however they work really well and are quick to apply when you have already created the actual feature. When creating a fake mustache with the small pieces of wool, I learnt that I needed to cut the pieces into even smaller sections. I had left some longer pieces and they were harder to apply and make look realistic. Using a brush also makes the process a lot easier because it allows you to build up the hair. Overall I really enjoyed using different techniques and products. With even more practice I will be able to create larger sections of facial hair that are as realistic as possible.