Thursday, 20 October 2016

Week 4 - The Beauty of Sci-Fi

In our hair and make-up lesson this week we were looking at the beauty of Sci-Fi in films. We were given characters from Sci-Fi films whose looks we had to copy. These specific looks were not typical make-up designs. They consisted of painted faces using a variety of different colours, techniques and shapes. In class we recreated our chosen character from either Mad Max, Blade Runner or The Hunger Games. To complete the look ourselves we could use either our aqua or supra colour palette. We were told about the properties of both of these palettes and depending on the look we had chosen we had to decide what would be the best one to use. 

Aqua Palette 

  • Water based - you can add water to the colour to change the transparency of it if you wanted a thinner layer on the skin
  • Not as pigmented when first applied
  • You can also then build the colour up in layers to make it as pigmented as possible
  • Using a sponge helps if you want different textures
  • You need to think about your make-up look and the scenario your character will be in if you choose to use aqua colour. If you know your character will be in hot conditions then they may sweat. This will cause the colour to run
Supra Palette
  • Grease based - can be applied straight to the skin
  • Blends easily due to the texture
  • To be used in conditions where actor could be sweating/in water - won't run 
  • When supra colour is dry, you can apply aqua colour over the top 
To finish the look you can apply fixer spray over the top to set everything and it will not rub off on clothes. You can also apply eye shadow or powder over the top to set this. 

I chose to complete a look that was featured in Mad max. It was simple yet featured many different ways of application. Black was the only colour used and 

Week 3 - Hollywood Glamour

In our third lesson on hair and make-up for TV and film, we learnt about creating glamorous waves in the hair.  We would be using heated rollers to create the waves. It is possible for you to use curlers, however the rollers are quicker to use and will hold a stronger curl. 

Products used
- Heated rollers
- Paddle brush
- Pin tail comb
- Clips

Process
Create your side parting on the hair ensuring it is as straight as possible as this will give you neater curls when you take out the rollers and style the hair. We would be using the blue rollers from our heater roller set, however if your model has thinner hair then the white ones will work just as well. Working from the front to the back take a section of hair that is no wider than the roller itself and not too thick. Place the roller at the top of the section of hair and roll downwards ensuring that the hair is flat. You can use the end of your comb to bring the end strays of hair round the roller. Use a clip to ensure it will stay in place. On the side with the largest amount of hair complete this process four times and on the other side twice. The hair you have left just above the ear will be curled towards the face using the same process. Start and the front with an even section and then do this once more. You should then have an even line around the front of the head. Now you have reached the top and back of the head you should use the brick work technique to ensure every section of hair is curled. The sides of the head should then be rolled forwards again. When you have completed curling all of the head leave in for 5/10 minutes. Take the clips out and pull out the rollers. Pulling these out too fast or hard could risk the curls being damaged. When all of the rollers are out you then need to style and place the hair. Using a brush take a large section from the front and brush over the top then underneath and then back over the top again. This will loosen the waves but not risk the curls dropping. Once you have brushed all of the hair you can then begin to style the hair and place it accordingly. 



Reflection
I have only worked with heater rollers once before, however I do find the process fairly easy. The only thing that I find hard is keeping the hair tight to the roller, but making sure all the hair is flat to the roller. If the hair is loose then there will be a bulge at the bottom which will not curl fully. If your model has long and thick hair then I think the process would take a long time. In class I ran out of lesson time to finish curling the whole head, however I tried my best to get as much done as possible and practice all the techniques used. My model had thinner hair along her hairline therefore it was really hard to curl these smaller sections. It took me a few tries to begin with to achieve a tight curl, however it got easier the more I completed. I would love to have been able to complete the all the curls across the head, however I am happy with what I managed to complete. The curls looked professional and slick. I feel that with product in the hair it would have looked even better. 

Monday, 10 October 2016

Week 2 - Make-up for Black and White Film

In this weeks lesson with Lottie we moved onto the make-up of TV and film. In black and white films, actors and actresses features need to be accentuated so that they stand out on camera. This style of make-up really interested me and I was intrigued to learn more about why make-up was applied like it. Through research I found out that this type of era goes back to the stage era. In the 18th century there was no electricity, therefore the stages had to be lit through candle light. This meant that the actors facial expressions and features would be blurred due to the soft light. The darker make-up was applied to the face to stop this from happening. This light also meant that any flaws could be easily picked out. Different types of grease were tested to see what would work best as stage make-up. 

Products used
- Kryolan foundation palette 
- Kryolan concealer palette
- Range of brushes
- Illamasqua translucent powder
- Illamasqua highlight 
- Mac cool neutrals palette - brown
- Black supra colour

Process of creating make-up looks for black and white films
- Always moisturise, cleanse and tone the face
- colour match your foundation to the models/actors skin
- then add a paler colour to this matched shade. The base was always a lot paler than the persons skin
- apply using your brush or fingers
- avoid getting foundation on the lips because the colour that you then apply will not be as dark and pigmented
- don't forget to apply the base colour to the ears and neck
- using a buffing brush make sure all of the foundation is blended into the hairline
- using the palm of your hand push gently on the skin. This will give a natural look and make it look like the actor isn't wearing heavy amounts of make-up
- Using a translucent powder with slight shimmer or even a highlighter place this down the nose, cheeks, chin, cupids bow and the forehead
- using a brown, apply this colour into the crease of the eye and bring it out slightly. 
- blend this out and then apply more if it needs to be darker
- across the lid apply a paler skin tone colour. Add water to the eyeshadow to bring out the pigment and it will dry matte
- harsh lines will show up on camera which is what is desired. Avoid pinks and oranges
- Layer black/brown to accentuate the eyebrow
- Contour the cheeks, nose and chin using a brown
- Blend out the colour by using circular motions with either a brush or your finger, however you need to leave the line looking strong and the colour still pigmented
- Create a smudge lip
- UIing either a black paint or liner place all over lips and slightly over your models natural lip line
- Make sure that no natural lip colour is visible as it will look patchy on the camera
- When complete take a photo and change add a black and white filter to see if you need to add more definition or tone it down



Reflection
I was unaware of this make-up style and the effect it gave before this lesson. I find the effect it gives is extremely clever and works well on camera. I found being able to see the colour image and one in black and white really helpful because I could then see what I needed to add or improve. Overall I really enjoyed creating this make-up look due to it being something quite unusual. I found it hard trying to stop myself from blending away the harsh lines and making it look more like how people wear make-up nowadays. Overall I was really happy with my first attempt at this style of makeup and going against the norms. I find it so helpful learning techniques and skills like this because it is all useful knowledge to know when working in the industry. 


Reference
https://silentology.wordpress.com/2016/02/22/silent-film-makeup-what-was-it-really-like/

Week 1 - Beards, Mustaches and Wigs

In our first lesson back with Lottie she informed us all about fake beards and mustaches as well as how to apply wigs to the head. Wigs that are used in films and TV shows are normally high in price due to the hair being human hair. 

Products used
- Scissors 
- Coloured synthetic and real hair
- Stopple paste
- Powder brush
- Spirit gum remover

Fake beards and Mustaches
When creating a fake beard or mustache on your actor you first need to find the colour of hair that best suits them. If they are going to be wearing a wig then you need to match it to this. It can look more realistic if you add in lighter and darker pieces of hair as a persons facial hair is never normally all one colour. When you have collected all of strands of hair, you then need to cut or pull these into the smallest of parts. They should be as small as possible, so that you can apply them easily to the face and build it up. Place a line of stopple paste on the skin where you want the facial hair to be. Using a big make-up brush pick up some of the hair onto the brush and dab onto the skin. The hair will stick to the paste. You can then build up the hair as much as possible. To remove use spirit gum remover. 

Some beards and mustaches are pre-made and the hair is stitched into fabric that can then be placed on the skin. These are used if you want fuller looking facial hair but the process to make them takes longer.



Wigs
Any wig no matter the colour or length can be applied to anyone. A bald cap can be applied to the hair to hide the models original hair. Using spirit gum on the head and the wig itself, you then stick the wig to the head. The hair of the wig is sewn into fabric, therefore the spirit gum does not go onto the hair. Again you then use spirit gum remover to take off the wig.


Reflection
This was the first time that I had worked with wigs and fake facial hair. I was slightly apprehensive because I know that it can be hard to make it look realistic. I loved working with the wigs because it allowed me to see how different hairstyles and colour can change someones face shape and the colour of the skin. It is therefore important when designing your characters that you think about things like this. The fake beard would have looked a lot more realistic if we had more time to blend it to the skin even more, however they work really well and are quick to apply when you have already created the actual feature. When creating a fake mustache with the small pieces of wool, I learnt that I needed to cut the pieces into even smaller sections. I had left some longer pieces and they were harder to apply and make look realistic. Using a brush also makes the process a lot easier because it allows you to build up the hair. Overall I really enjoyed using different techniques and products. With even more practice I will be able to create larger sections of facial hair that are as realistic as possible.